Vertical Machining Center
Home>Products>Vertical Machining Center>LMC-1000
LMC-1000 (Compact Sized)
Standard Accessories :
- Full splash guard.
- Pre-extensioned ballscrew.
- Spindle oil cooler system.
- Auto Lubrication.
- Working lamp & alarm light.
- Heat exchanger on elec. cabinet.
- Levelling pads & bolts.
- Adjusting tools & box.
Optional Accessories :
- Spindle speed 10000rpm.
- Coolant thru spindle.
- Coolant thru tool holder.
- Auto tool length measurement.
- Chip clean spray gun.
- Screw type chip conveyor & bucket.
- M30 auto power off function.
- Motor spindle.
- Direct drive spindle.
- Cam-type tool changer system.
- Workpiece probe (Renishaw MP-10/12).
Specifications :
» V-16 » V-24, V-32
| SPECIFICATIONS | UNIT | LMC-1000 |
| Table Overall Size | MM | 1200x610 |
| Working Area | MM | 1200x610 |
| T-slots (Width/No/Pitch) | MM | 18x6x100 |
| Table Max. Loading | KG | 600 |
| X / Y / Z Travel | MM | 1020/610/610 |
| Spindle To Column Ways | MM | 640 |
| Spindle To Table Top | MM | 78-688 |
| Floor To Table Surface | MM | 842 |
| Spindle Taper | BT# | 40 |
| Spindle Speed | RPM | 8000 |
| Front Bearing Diameter | MM | 70 |
| Spindle Motor | KW | 7.5 |
| X / Y / Z Stalling | N.M | 13.7 |
| X / Y / Z Cutting Feedrate | MM/MIN | 1-7000 |
| X / Y / Z Rapid Traverse | MM/MIN | 24/24/20 |
| Type Of ATC | Carrousel | |
| No. Of ATC Tools | Tools | 20 |
| Max. Tool (Dia / Length) | MM | 150/300 |
| Max. Tool Weight | KG | 7 |
| Tool To Tool | SEC. | 6 |
| Chip To Chip | SEC. | 12 |
| DIA. x Pitch (X / Y / Z Axis) | MM | 40x12 |
| Precision Class | MM/300/MM | C3 0.008 |
| Machine Weight | KG | 6500 |
| Power Requirement | KVA | 20 |
| Pneumatic Required | KG/CM2 | 7 |
Relative Products :
Copyright © Eumach Co., Ltd. Tel: +886-4-25810031 Fax: +886-4-25810003
2, Ying Lin Lane, Ho Sheng St., Ho Sheng Village, Shih Kang Hsiang, Taichung Hsien, Taiwan, 422, R.O.C.